DMX Lighting Desk (or how to easily adjust the lights!)

Turning on the lights, and the DMX controller

Use the mains power switches on the wall behind the DJ / lighting bench to turn on the lights.
Some fans should come on, and the 'moving heads' will move for a second while they calibrate.

The ON/OFF switch of the Eurolite DMX controller is located on the backside towards the right of the unit.

Using the 'Eurolite DMX Move Controller 512 Pro' lighting controller

Thie simple little lighting desk gives full control over all the (permanently mounted) stage lights in the lab.

To change colours, simply:

1. Toggle the light(s) fixtures that you want to control using the bottom row of buttons
2. Adjust the faders above to change Red, Green, Blue, White, Strobe, etc.
3. The main dimmer controls everything, so make sure it is open if you do not see anything. The strobe dimmer should be open, too!
4. ... repeat for any of the other lights you want to adjust.

That's it!

There are a few built-in colour presets, too: see the 15-button matrix located on the right.