Skip to main content

E-Textiles 101

This page is a guide to different techniques that can be used in electronic textile design, resources we have at the CCI, places to source materials, and possible sources of inspiration/research references.

CCI Textiles Equipment

At the CCI we have two programmable pieces of textiles equipment:

Both of these machines require training to use. Please check Orb for upcoming tutorials, or contact Agnes for more information.

Programmable knit sample:

Digital embroidery sample:

Online Resources

A fantastic resource for most e-textile related ideas and tutorials is How To Get What You Want, aka the KOBAKANT art collective DIY wearable technology documentation site. I'd strongly recommend just browsing around the site -- they have some great detailed guides, including knitted sensors, robust hard/soft connections, textile speakers, and using conductive velcro as a switch.

Materials

Conductive Thread

It's better to think of conductive thread as a long resistor than a traditional cable. All conductive threads come with an associated resistance per unit length, and this can vary a lot between different brands and thicknesses. For a ballpark figure, Adafruit's 2 ply conductive thread is made of stainless steel, and has a resistance of 16 ohms/foot. If you're unsure of which brand you're using, you can always use a multimeter to measure it.

Image showing a pair of hands holding probes touching a length of conductive thread. The probes are attached to a multimeter, which reads the resistance of the thread.

Adafruit have a short conductive thread tutorial that covers basics like hand- and machine-stitching, and steps to prevent short circuits.

Conductive Yarn

Conductive yarn is different to conductive thread: it has much higher resistance, which makes it inadequate to directly connect components unless they are very close together or the knitted yarn is stretched, but it is well-suited to pressure sensing.

When a knitted sample is held loosely, it has a high resistance as the steel fibres in the yarn do not make contact with one another, but when the sample is stretched, the steel fibres are pulled into closer contact, reducing the resistance and allowing the flow of an electric current.

Conformable Connections

Conformability is key to making robust e-textile projects, and is particularly relevant to projects using conductive thread

Sourcing Materials

Back to top