Recently Updated Pages
Anaconda not on CCI machine
All CCI machines should have Anaconda pre installed. Once you log in to one of our machines with ...
Python language
If you are brand new to the Python programming language, you first need to have it properly insta...
Filaments Settings
PLA Basic but Important Printing Guide Default settings won’t work, make sure you set them correc...
Step 2 - Print Setting
Model Setup Scale & Size – Too small → loss of detail; too large → longer print time Orientation...
Step 4 - 🌟🌟🌟Check the machine before you started
3D Printing Workflow Manual From slicing to post-print care — applies to UltiMaker Cura 3D print...
Sending data between TouchDesigner and Arduino
Just like most other creative coding languages and platforms, TouchDesigner allows you to connect...
Workshop: Generative Embroidery with p5.embroider
This is the written version of the e-textiles embroidery workshop, and can either accompany the l...
Step 3 - Model Checking
Ultimaker Cura has a workflow based on three stages; the prepare, preview and monitor stage. Each...
How do I get a static IP, or DHCP reservation?
Wherever possible this should be avoided, please see information about how to get your current IP...
How do I get the IP address of my device?
Depending on what device you are using you'll need to take a different approach. Windows In Windo...
How to connect microcontrollers (Arduino) and single board computers (Raspberry Pi) to the UAL network
Many microcontrollers and single board computers have trouble with connecting to more secure netw...
How do I find the MAC address of my device?
To connect your device to UAL-IoT we need it's MAC address, a unique address to that device. A MA...
How to add a MAC address to the UAL-IoT whitelist
All devices have to be requested through a UAL MySupport ticket to IT. Click here to raise a requ...
Workshop: Using Arduino with PEmbroider
This is a write up of part of the PEmbroider tech skills workshop explaining how to use inputs fr...
Jumpstart Workshops
For the 2025-26 academic year, we have organised a series of 3 optional preparatory workshops des...
Floor plans all CCI buildings
CCI Buildings CCI is divided into three buildings, two in South London and one in Central London...
How to access the CCI IoT data
We have several IoT sensors, including AirGradient indoor and outdoor air quality sensors, which ...
Using CCI's MQTT endpoint
MQTT is a networking protocol that uses a 'publish-subscribe' model (where some machines 'publish...
DJ Controller
SADLY, THIS DEVICE IS NO LONGER AVAILABLE AT CCI! How to use the Numark...
Spring 2026 Tech Skills Calendar
This is the new schedule for the spring 2026 technical skills workshops. As ever, no prerequisite...