Recently Updated Pages

This page gives an overview and step-by-step instructions for some basic skills and techniques fr...

This is a guide on how to set up your HP DGX Spark Ai Computing kit. What is in the kit? 1 x HP D...

The Bambu H2D Pro printers are not general access machines. They are available only to experience...

Recommended reading list（Our printers are Bambu H2D Pros）： https://bambulab.com/en-gb/support/aca...

We have a range of software available on our computers on-site, and that you can install on your ...

Peckham Road (PR) was the first building CCI occupied, we're spread across the 4th and 5th floors...

The technical team at CCI can be contacted on Slack during office hours. However, new questions s...

This is where students, staff and the public can access helpful resources developed by the CCI te...

The term time opening hours of the new building are anticipated to be: Hours Weekdays 08:30 – 22:...

All CCI courses will move to the new building under one roof: Undergraduate BSc (Hons) Computer S...

This information will be updated in Autumn 2027 once the building is ready to be occupied.

UAL has a wide range of technical resources built to serve the learning outcomes of the courses i...

https://www.formware.co/onlinestlrepair

For any general Advice, support or issues reach out to your friendly admin team if you have any f...

The MPR121 is a tiny microchip formerly manufactured by NXP, now under Resurgent Semiconductor, i...

When you need to use a specific filament or want better quality, you could dry the filament one d...

This guide covers the initial setup required to use a ROLI Airwave device with third-party MIDI s...

This guide explains how to set up and calibrate Tobii Pro Spark eye tracker using Tobii Eye Track...