Recently Updated Pages
Using NAO V6
Usage Guidelines Please read NAO's pocket guide before using the robot. This can be found in th...
Using Adeept robot arm kit
What is it? The robot arm kit from Adeept is an eduational robotics kit that is mainly aimed towa...
Using Go1 Edu robot dog by Unitree
Safety guidelines This robot requires an induciton before you use it for the first time. If you h...
Using Pololu 3pi+ 32U4 OLED Robot
What is it? The 3pi+ 32U4 (standard edition) by Pololu is an ATmega32U4 micrcontroller based prog...
Using Turtlebot4
What is it? The Turtlebot 4 is the latest addition to the Turtlebot series, which is a popular ro...
Using UR5e with 2F-85 adaptive gripper
Safety guidelines This robot requires an induction before you use it for the first time. If you h...
Using Dobot Magician V2
Dobot Magician V2 What is it? The Dobot magician is a 4 Degree of Freedom robotic arm. What can...
About Nerve Lab
Nerve Lab was part-funded in 2023 by the Regional Investment Fund. Combining the latest in wearab...
Opening Hours of CCI South London
The following hours apply during UAL Term Time. Peckham Road and Greencoat Building This is the o...
Opening Hours of CCI Central London
The following hours apply during UAL Term Time. High Holborn This is the opening time for High Ho...
What does open, project and no access mean?
There are 3 modes of access across the technical resources: Open Access You can walk in and acces...
Virtual Tour of CCI's Greencoat Building
Join us on a virtual tour of our Greencoat Building, at any point feel free to stop and navigate ...
The Hub at Eagle Wharf
The Hub at Eagle Wharf in Peckham is a community hub which is regularly used by CCI for exhibitio...
Courses at CCI South London
The following courses are taught across our South London campus which includes Peckham Road and G...
Virtual Tour of CCI Central London
Join us on a virtual tour of our High Holborn building, at any point feel free to stop and naviga...
Courses at CCI Central London
The following courses are based out of CCI Central London (High Holborn). Undergraduate BSc (Ho...
Locations
You can see the locations of these and nearby halls of residence on this map:
Using the AxiDraw V3 A3
We have a Evil Mad Scientist AxiDraw V3 A3 this machine can be used at no cost other than provid...
What software is available at CCI?
We have a range of software available on our computers on-site, and that you can install on your ...
Using the Brother Innov-is V3 Embroidery Machine
To use this machine, you must have had an induction from one of the technical staff. This guide i...